Steel Fastener (steel one anti-rust) (Extra 8%-10% for spare) A, (All screw must already set up,with 10% extra screw)
View Details
Steel Pipes (Hot galvanizing anti-rust Dia48mm Pipe with 2.5mm wall thickness)(Extra 4-7 pipe for spare) Our steel pipes are hot-dip galvanized steel pipes, where the entire steel pipe is immersed in a bath of molten zinc, so the inside and outside of the pipe will not rust for many years.
View Details
Including platforms, single-plank bridges, cable bridges, tunnels...all parts using woven materials
The woven platform must be made into a surrounding pipe (only the places under the bridge where children do not actually walk are assembled with steel bars and metal rings) PS: Additional woven platforms are required under large-hole bridges such as cable bridges and rope bridges.
The woven platform cannot share a horizontal pipe and must be staggered with a net height of 10cm+ (the woven platform is assembled with steel bars and can share the same pipe for detours)
Our foam pipe covers are 72″ thick with the diameter of the pipes being 3.34″. The PVC vinyl has a pure and bright color and is also UV-resistant making sure the pipes stay flexible and durable even when exposed in sunlight. The foam pipe covers of other companies might only be 7cm with the diameter of the pipes being only 3.1″ as well as having PVC vinyl that is not UV-resistant causing the colors to fade and the PVC vinyl itself to become fragile over time.
The zip ties used to tie the foam pipes to the steel pipes are made of high quality plastic, making it flexible yet still tough.We use generously more zip ties to tie the foams onto the steel pipes, the space between our zip ties is 5″to 6″, in comparison with 9″ to 10″ of space of some other manufacturers.
Our safety nets are fire-resistant and tightly woven, certified for use even in outdoor sports.Our fire-resistant anti-climbing nets will be used on the first level of the playground to prevent children from climbing onto the outside of the structure.
Must cut round corner, So no gap with pipe.
Must have sponge, So the touch is soft. Soponge must bigger than 49", so edge also protect:Foam must be 1.4″ thickness；Wooden at least be 0.7″ thickness；On top Using 1000D, Matt 0.55mm PVC tarpaulin.
Deck boards are completely wrapped in foam and covered with the same PVC tarpaulin on the front, rear and sides, thus making sure the deck boards are soft on all sides. This provides the best protection and care for the children as well as giving the boards an aesthetically pleasing look.
The balls that we provide for our ball pools/pits are of the best quality and come in multiple bright and fun colors.
We place stairs at the entry area from outside and exit area from inside of the ball pool / pit. This will make it easier the kids to enter in and exit out of the ball pool.
In addtion to standard balls we also carry GermBlock balls which are proven to resist germs from children.
Vertical plate obstacles are fixed by three long arm fasteners
Vertical triangular obstacles are fixed by two two-way long arm fasteners, and screws must be embedded (the installer must first unscrew the screws)
Horizontal obstacles that need to be fixed on the platform must be embedded with screws (the installer must drill holes on the platform for the screws to pass through)
Our commercial-grade trampolines are built with strong metal structures and specially strengthened metal components such as the tailor-made springs. These structure and components will ensure that the trampoline will be sturdy and durable.
The trampoline cloth used in our trampolines is thick and made of high quality fabric that is made specifically for trampolines. Nylon webbing is stitched on all sides of the trampoline cloth using strong nylon threads to ensure the durability of our trampoline cloths.
Our ramps and stairs have a layer of high density EVA foam similar to the materials used in making our EVA floor mats.
This layer of high density EVA foam will enable the ramps and stairs to withstand the treading’s of the kids and yet still maintain its original shape for years to come.
LEARN MORE >>
The sides of the ramp are tied directly to the safety netting to make sure that there no gaps or spaces in between.
LEARN MORE >>
Metal pipe should be assembled, Using 1000D matt PVC, Standard length as below.Level 1 to level 2:
Story height:125cm,L= 261cm. Story height:135cm,L= 265cm. Story height:140cm, L= 268cm. Story height:150cm,L=272cm. Story Story height:170cm or more than 180cm,L=277cm(because need add starting platform)
Above level 2:
Story height:125cm,L=265.Height:130cm,L=267. Height:135cm, L=270. Height:140cm,L=272. Height:150cm,L=277. Height:160cm, Above stair and bridge must incluing one PVC rim with Button- holing (incase any fall of kids)
">
Metal pipe should be assembled, Using 1000D matt PVC, Standard length as below.Level 1 to level 2:
Story height:125cm,L= 261cm. Story height:135cm,L= 265cm. Story height:140cm, L= 268cm. Story height:150cm,L=272cm. Story Story height:170cm or more than 180cm,L=277cm(because need add starting platform)
Above level 2:
Story height:125cm,L=265.Height:130cm,L=267. Height:135cm, L=270. Height:140cm,L=272. Height:150cm,L=277. Height:160cm, Above stair and bridge must incluing one PVC rim with Button- holing (incase any fall of kids)
" width="70" height="70" >Metal pipe should be assembled, Using 1000D matt PVC, Standard length as below.
Level 1 to level 2:
Story height:125cm,L= 261cm. Story height:135cm,L= 265cm. Story height:140cm, L= 268cm. Story height:150cm,L=272cm. Story Story height:170cm or more than 180cm,L=277cm(because need add starting platform)
Above level 2:
Story height:125cm,L=265.Height:130cm,L=267. Height:135cm, L=270. Height:140cm,L=272. Height:150cm,L=277. Height:160cm, Above stair and bridge must incluing one PVC rim with Button- holing (incase any fall of kids)
LEARN MORE >>
Our fiberglass wave slide is made of colored gel which is abrasion-resistant and highly durable. The wave slide gel will help to keep a brightly colored and glossy surface even after many years of usage.
The body of our fiberglass slides are almost twice as thick as the slides of some other companies. Our wave slides are built with railings on the sides to keep the children safely on their own slide chutes.
The sides of the slide structure are enclosed by anti-climb netting with small mesh to prevent children’s fingers from getting caught in the netting and also to prevent the kids from climbing up the slide.
We install a big and thick soft mat at the end of our long exit section. The safety netting is also extended to surround the sides of the landing/exit area to prevent collision accidents between children who are exiting the slides and other children.
Our spiral tube slides can comes with clear windows that are covered by a strong and clear lens made of the same materials used in manufacturing bullet-proof windows.
The landing/exit area of the slides are surrounded by safety netting to prevent collision accidents between the children who are exiting the slides and the other children.
Must do trial install to test height for entrance of slide, adust the height of platform in a line.
Must do trial install o measure the exactly length,make sure have soft pad for landing (Pad made by 2cm wooden+ 2cm foam+4cm
Inspecter must check color, workmanship, the cut open for support on pipe.
Other fiber glass decration parts like tiger head,dragon head,monkey head must assemble pannelon and do support under it.
Our punch bags are fully stuffed with foam and wrapped with our strong PVC tarpaulin making it bouncy and giving the punch bags a plump look.
They are attached to the structure using a steel harness which is very reliable and durable and also gives the ability to allow full range of rotation.
The steel harnesses is covered with soft padded PVC covers for the children’s safety in addition to also giving the enitre playground its upscale finish.
See Everything About Your Users At One Place
EN
AR
FR
DE
PT
RU
ES
TL
VI
TH
TR